Home > News > Content

Water Hose Preservative

Sep 30, 2017

Water Hose preservative

We often see the finished product is actually a lot of water pipes are also used thickener, according to the hydraulic connector to understand that most of the high-performance hose is made of multi-layer film, and the connection between the film commonly used adhesive To carry out adhesion. It is understood that the use of high-pressure tubing adhesive for the thermoplastic resin, heat resistance and excellent insulation properties.

The inner layer of the multifunctional chemical hose is composed of smooth, translucent ultra-high molecular weight polyethylene. The reinforcing layer is composed of high strength synthetic core and wound layer with several layers of metal wire. The outer layer is made of corrosion resistant, ozone resistant and wear resistant (XLPE) and better curvature of the outer corrugated outer layer (UHMW), which is characterized by a special rubber composition,

Excavators and various mechanical matching assembly of high-pressure construction machinery hose, used to transport gas, liquid, slurry or granular material of a class of tubular rubber products. Urethane rubber, polyester rubber and the like. The hose is easy to bend, can be buffered, light weight and easy to install and so on. It is widely used, such as agricultural irrigation and drainage farmland. It is composed of inner and outer rubber layer and skeleton layer. The materials of skeleton layer can be made of cotton fiber, various synthetic fibers, Or asbestos, wire and so on. Harbor dredging pumping mud, aircraft, tanks, cars and many mechanical equipment in the hydraulic system, pneumatic systems, fuel systems are used many hoses.

The rubber hose is made of nitrile rubber, fluorine rubber or silicone rubber. It is made of natural rubber, styrene butadiene rubber or butadiene rubber. In recent years, the use of thermoplastic rubber, such as thermoplastic poly

Common viscosity of the relative molecular mass of 200 to 1500, generally large and rigid structure. The resin tackifier is thermoplastic and is usually amorphous glass at room temperature. The resin tackifier forms from brittle solids from room temperature to melting point up to 90 ° C, which are generally quite soluble in aliphatic hydrocarbons, aromatic hydrocarbons and many typical organic solvents.

  At the same time the factory spot anti-static rubber sheet, anti-skid rubber sheet, industrial rubber sheet, soft connection, high and low pressure hose specifications!