Rubber hoses are steel braided hoses. The hose consists of an inner layer, a layer of wire braid and an outer layer. Suitable for conveying hydraulic fluids such as alcohols, fuels, lubricants, emulsions and the like.
Rubber Hose Process
Wire braided hose (double wire)
Structure: hose from the inner layer, the second layer of steel woven interlayer and outer layer composition.
Application: Suitable for conveying hydraulic fluid, such as alcohol, fuel, lubricating oil, emulsion and so on.
Operating temperature: -66 ℃ - + 135 ℃
With a long life; no animal raw ingredients; smooth inner wall to provide smooth flow while easy to clean; low moisture absorption, low permeability; hose for the translucent color to visually monitor solution flow; by FDA certified materials; Meet the USP, ISO and EP standards; can be high temperature sterilization and autoclaving; able to tolerate.
Biological ingredients drinks with peristaltic pump tube, especially for the key fluid and peristaltic pump design and production. The hose is translucent and has good elasticity and is suitable for fluid processing equipment.
First, the use of rubber hose Note:
1, be sure to use rubber hose within the recommended temperature and pressure range.
2, the hose with its internal pressure expansion and contraction, please cut the hose into a slightly longer than you need.
3, when applying pressure, please slowly switch any valve to avoid the impact pressure.
4, rubber hose in the bending radius of the above conditions, otherwise it will cause the hose to break, reduce the pressure resistance.
5, the use of powder, particles, according to the conditions may produce easy wear phenomenon, please try to enlarge the bending radius of the hose.
6, in the vicinity of metal parts, do not use in extreme bending state.
7, do not touch the hose directly or close to the fire.
8, do not use the vehicle pressure pressure hose.
1, the use of rubber hose to be applied to the transport of fluid.
2, in the hose used in oil, powder, toxic chemicals and strong acid or alkali, please consult the product provider.
Second, the assembly of the note:
1, please select the hose size for the hose connector.
2, the connector part of the tail into the hose, the hose and tube tail coated with oil, do not use roasted. If you can not insert, you can use hot water heating hose inserted into the connector.
3. Insert the serrated part of the joint completely into the hose.
4, do not use a pushable connector, may cause the hose rupture.
5, please avoid the use of excessive wire ligation, please choose a special sleeve or tie.
6, please avoid the use of scars or rusty joints.
Rubber Hose Third, check the note:
1, before use Check: Before using the hose, please confirm the appearance of the hose with or without abnormal trauma, hardening, softening, discoloration and so on.
2, regular inspection: the use of the hose, be sure to implement a monthly check once a month.
Fourth, security matters:
1, the operator to wear safety protective clothing, including gloves, rubber boots, eye protection, these equipment is mainly used to protect the safety of the operator.
2, to ensure the safe and orderly work area.
3, check the joints on each tube is solid.
4, do not use, do not make the tube in the pressure state. The closing pressure can extend the service life of the hose (silicone hose, Teflon hose, rubber hose, food grade hose, hygienic hose, thermoplastic rubber hose, sanitary grade plastic hose).