Industry Rubber Hose Structure Type
Industry Rubber Hose structure type
Selling industrial hose friends may encounter, often encountered in the summer industrial hose manufacturers quality problems. In fact, this is already commonplace thing. Especially the manufacturers, this time to do the industrial hose particularly sensitive.
Why is this so?
Listen to me carefully to:
To do industrial hose process, there is a link is very important, is the water temperature problem.
Water temperature problem is too high, mixing in the mixing process, if the control is not good, it is easy to glue. Summer for winter, the temperature itself is relatively high, in the basic mixing rubber, the water temperature control control is not good, will squeeze the rubber force to play to the evaporation. Out of the compound rubber (mother plastic) dry, if it is mortar glue, then go to feed (eat sulfur). It is likely to be a quality problem.
On the other hand, if the glue within the glue (eat sulfur), do not control the water temperature, the water temperature is too high, will cause local cooked glue. The emergence of cooked particles. These particles are the hidden dangers of industrial hose leakage.
Again, or the old problem, or the temperature problem, if the finished product glue time is too long, not placed in a cool place. It is easy to sulfur. Do not spend more than a month. Month, the average daily temperature of 35 degrees, very likely to cause sulfur from the reaction. At that time, then use, this glue has been used. Sometimes, the middleman found this time out of this industrial hose, the skin is particularly good stripping, that congratulations you. Just you encounter from the sulfur glue treatment, with good plastic mixing. Out of the glue binding, no good glue good glue. However, this can not be all from the sulfur glue, because all is, the extruder simply do not come, are cooked rubber particles. Simply can not be normal out. structure type:
The steel wire braided hose structure is composed of a rubber-resistant synthetic rubber inner layer, a middle rubber layer, a layer I or II or III steel wire reinforcing layer, and a weather resistant synthetic rubber outer layer.
Steel reinforced hydraulic rubber hose is mainly used for mine hydraulic support, oil field mining, suitable for engineering construction, lifting transport, metallurgical forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and industrial sector mechanization, (Such as mineral oil, soluble oil, hydraulic oil, fuel oil, oil) liquid, water-based liquid (such as emulsion, oil and water emulsion, water), gas, etc. and liquid drive use.